Mutoh VJ-1638UR — [*] Ink Low KCMY is displayed depending on the states of the Cartridge or the remaining amount of the smart chip.
VJ-1638UR
Mutoh VJ-1638UR — [*] Ink Low KCMY is displayed depending on the states of the Cartridge or the remaining amount of the smart chip.
[*] Ink Low KCMY is displayed depending on the states of the Cartridge or the remaining amount of the smart chip.
Ink has run out. Printing
operation stops
immediately.
Checks / troubleshooting:
1. Check the ink in the ink cartridge.
2. Check the ink cartridge with no ink in “Sen. :
Ink END KCMY” in the self-diagnosis
function to see if the ink cartridge displayed
is the same one with the error.
3. Is there ink leakage or bleeding around the
connection area of Ink tube?
4. Has the ink cartridge been left removed?
5. Check if Solenoid is functioning normally in
“Ctrl : Test” - “Test: Sensor" - "Sen.:
TankValve" in the self-diagnosis function.
6. MAIN board may be damaged.
1. Are Ink cartridges used dedicated ink
cartridges?
2. Is the message displayed after turning off the
printer and turning it back on?
Recommended actions:
Replace the ink cartridge when there is no ink.
If there is sufficient amount of ink, refer to the
check item 2.
• 6. MAIN board may be damaged
• ink cartridge when there is no ink
VJ-1638UR